Version 5.1.4 update 8September2009: ---------------------------------------------- Bug fixes in 5.1.4 ---------------------------------------------- * Arabic text did not display certain punctuation characters in correct RTL order, but instead located them at the wrong end of words as if they were LTR text. Version 5.1.3 update 2September2009: ---------------------------------------------- Bug fixes in 5.1.3 ---------------------------------------------- * During an export of the knowledge base, if an entry was found, it caused the export to get into an infinite loop and produce an increasingly huge file on disk until eventually a crash occurred. * Fixed failure of change of highlight colour for auto insertions to "stick" beyond closing the colour dialog. * Export of glosses omitted exporting of a gloss phrase when the gloss phrase was added after the merger was done in adaptation mode. It now doesn't omit such data, and if an embedded marker is within the phrase, a "Place Phrase Internal Marker" dialog shows for the user to place the phrase-internal marker correctly, during the export. (This is identical to how phrase internal markers are handled when exporting the target text.) * When doing either a free translation or glosses text export, and the button Export Filter/Options is clicked, the list does not show \note, \free nor \bt (or derivatives) markers because these are obligatorily not included in such exports, so there is no point in displaying them as a filterable choice. * The checkbox for "no automatic document saves" was turned on for the first session after just installing for the first time. This was dangerous because a power failure could then result in work loss if the new user had not done any manal document saves. The checkbox now defaults to being off, so that automatic saves are ON by default. * When the user has adapted all the document and the phrase box has become invisible, if he then used the Step Up button the application crashed. * Exporting the knowledge base, a bug was introduced recently and first line entries had information doubled up, looking like: \lx word\lx word this is now fixed. * The Auto-Saving page of the Preferences did not have the spin buttons hooked up to the text boxes which display their value. They now work correctly. * Includes an updated ECDriver.dll for use with the current version of SIL Converters. Version 5.1.0 update 15August2009: ---------------------------------------------- Feature changes and new features in 5.1.0 ---------------------------------------------- * Moved all the export functionalities to a new menu: Export-Import; both for exporting from the document, and exporting/importing the knowledge base. (Gives a less cluttered File menu.) * Added an Export Free Translation... functionality to the new Export-Import top level menu. By default, the Export Free Translation... command exports all the SFMs except for Notes and Back Translations. If the inclusion of text associated with other SFMs clutters the output, the user can run the command again, and this time use the Export Filter/Options button and in the child dialog he can then tick the checkboxes for any markers which he wants to be filtered out of the exported data. * Adapt It remembers the path of the last used export location for Free Translations in its project configuration file. * Added an Export Glosses As Text... functionality to the new Export-Import top level menu. By default, the Export Glosses As Text... command exports all the SFMs except for Free Translations, Notes, and Back Translations. If the inclusion of text associated with other SFMs clutters the output, the user can run the command again, and this time use the Export Filter/Options button and in the child dialog he can then tick the checkboxes for any markers which he wants to be filtered out of the exported data. * Adapt It remembers the path of the last used export location for Glosses As Text in its project configuration file. ---------------------------------------------- Bug fixes in 5.1.0 ---------------------------------------------- * Bug fix: Splitting a document with the option "at a chapter marker" caused a crash. * Bug fix: Splitting a document with the one-chapter-per-file option caused a crash. * Both Split and Join failed to update the final open document's filename on the Title bar. This is now fixed. * Fixed bug that made the middle edit box in the View Filtered Dialog read only. It is now editable as it was in versions prior to 5.0.0. * Fixes this bug: the basic configuration file is saved at exit of the app with the value for the Hide Punctuation line set to 0. When this was the case, the next launch of the application correctly hid the punctuation, but the button for changing the setting would do nothing. Now this parameter is no longer stored in any configuration file, and the application always shows the text with punctuation when first a document is opened. Also, now if the application gets out of sync with the flag for controlling this feature, clicking the command bar button will rectify the situation, and then subsequent clicks of the button will toggle the setting's value as normal. Version 5.0.1 update 3August2009: ---------------------------------------------- Bug fixes and new features in 5.0.1 ---------------------------------------------- * Fixes a crash at the point that the progress dialog is displayed when changing the filtering settings within a document. * The filtering mechanism also now restores the phrase box contents at the active location properly. Unfiltering will do the same except when the new active location is within unfiltered material - in that circumstance the best it can do is to restore the phrase box empty - because earlier filtering has thrown away adaptation and gloss information which cannot therefore be recovered by unfiltering. * Fixes the following bug: after working in a document and closing it with File / Close, then doing File / New and creating a new document, the project's knowledge base file had its contents erased. * Fixes the following bug: if the File / MRU list is used to select a document created earlier in order to open it again, the application crashed. * Fixes the following bug: opening a document from the MRU list, particularly if transferring from a Right To Left project to a Left To Right project, resulted in wrong display characteristics and other usage problems. Transfers now go smoothly and LTR versus RTL differences don't any more arise in the transition results. * Fixes the following bug: Doing a Find operation where the matched text happens to lie within a retranslation resulted in the phrase box wrongly being placed at the first pile of the retranslation, and showing the wrong contents. This situation should show the whole retranslation selected but the phrase box disengaged from being "under" the selected source text. That is now what happens, the phrase box is immediately before the retranslation and the source text above the phrase box is not selected (because the following retranslation is selected instead). This is the situation we want if the user were to then Cancel from the Find Next, and decide to edit the contents of the selected retranslation. Version 5.0.0 update 21July2009: ---------------------------------------------- Feature changes and new features in 5.0.0 ---------------------------------------------- * Adapt It's display and interface has eliminated the "bundle" concept and now handles whole files as a unit. * Scrolling can now be accomplished from beginning to the end of a large document without the need to "Step Up" or "Step Down" through the document. * Responsiveness while adapting long (book-length) documents has been improved, and is constant for all document lengths. * The "Step Up" and "Step Down" toolbar buttons now act to move through a document chapter-by-chapter. * The phrase box is now positioned more intelligently on the display and the display's automatic scrolling is more helpful in keeping automatically inserted adaptations in view. * Find and Replace functions have been revised and improved and the display no longer displays separate pairs of source and target text lines (punctuated and non-punctuated) during Find and Replace operations. * The Replace button no longer does the replacement and then automatically advances to the next found text location that matches. That behaviour prevented the user from seeing what the effect of the replacement was, and it took away the chance of doing further editing before doing the next Find. Now the Find Next button has to be pressed explicitly once the user is ready, each time after a replacement has been done. (Replace All works as it did earlier.) * The toggle buttons for switching on/off two source text lines the display, and / or two target text lines, have been removed. * Use of the command bar button "Ignore Boundaries" has been extended. It can be used preceding any of the three selection methods (click & drag, shift+click extension, or ALT+arrow keys) to allow selecting across punctuation boundaries. It can also be used that way after you have commenced a selection, except for the drag-select method. * Re-established the legacy behaviour where if you click to place the phrase box elsewhere, when the phrase box has only copied source text which is still selected, the box contents are abandoned and nothing is entered into the document or knowledge base from the location that the box leaves. * When typing into the phrase box, or deleting, blinking has been eliminated except for when a necessary update of the display is required because the width of the phrase box has changed. * When re-opening Free Translation Mode at a location where a free translation has already been put, the application will automatically try to make a "best possible guess" at what the former setting was for free translation section length, and then set the radio button to conform accordingly - either to the "Punctuation" setting, or to the "Verse" setting. This also happens if you earlier changed the settings and you reenter a section which had a different setting in operation - you will see the radio button change to conform to that earlier setting at that location. * Adapt It now can process an -wf command-line option, where is the path to a folder to be used as Adapt It's work folder. When this command-line option is used the will be used instead of Adapt It's default work folder which has traditionally been called "Adapt It (Unicode) Work". The following the -wf option can be on a different drive/volume or even a network path. This option can be added to the command-line on most systems by right-clicking on a menu item, shortcut, or launcher icon that is normally used to start Adapt It, and choosing "Properties" from the popup menu. Find the Command or Target field that invokes Adapt It, and add a space followed by -wf followed by another space and the desired path. For example, the Command/Target field might look like this (on a Windows Start Menu item for Adapt It WX): "C:\Program Files\Adapt It WX\Adapt_It.exe" -wf "e:\My Data" in which case the project file(s) created by Adapt It would be located in the "My Data" folder on the e: drive volume. Note: paths containing spaces must be enclosed in quote marks. If no -wf command-line argument is supplied Adapt It reverts completely back to its classic behavior of creating an "Adapt It (Unicode) Work" folder in the user's "(My) Documents" folder (or whatever path and folder name the OS reports is currently being used for documents by the user), and using that folder as its work folder. If an administrator sets Adapt It up to use a custom work folder (using -wf ) AFTER data is already created at the default "Adapt It (Unicode) Work" folder location, Adapt It currently simply doesn't find the previously existing classic work folder, and will instead create/use what is specified in the -wf command-line option. An administrator who sets up the custom work folder can at the same time, copy or move all of the projects from a previously existing "Adapt It (Unicode) Work" folder to the new custom work folder and Adapt It will just "see" them there at the custom specified and all other previous program behaviors do not change. * Adapt It now detects if a user of the Regular (non-Unicode) version tries to input a new text for adaptation which is a Unicode encoded file, and aborts the input and informs the user that the Unicode version of Adapt It must be used to input and process Unicode files. * Significant work has been done on the internal representation code for the view of the document in the main window. Due to these changes there are some unavoidable performance degradations for some actions. Changing anything (such as fonts, or font sizes) that affects the width of the text in each pile in the display is now "costly" - but only for large documents - because the internal representation of the view has to be totally rebuilt when such things happen. Therefore, when you change some settings in the Preferencess, you may have to wait several seconds for the document to update. Once such document rebuilding is done, however, performance will return to being speedy for all normal adapting, glossing, or free translating work. * While we expect this version to be robust, please bear in mind that literally thousands of changes have been made internally. We've tested it a lot, but if you do something and you get an unexpected behaviour, please let one of the developers know as soon as possible. The "About Adapt It" menu item in the Help menu has email addresses for contacting us. We try to fix bugs within 24 hours. ---------------------------------------------- Bug fixes in 5.0.0 ---------------------------------------------- * Editing source text, particularly if deleting source text, at the very end of the document would crash the application. This has been fixed. * When a merge had been done across punctuation, a placement dialog came up which enabled you to specify where the punctuation should be placed within the target text. Formerly, this dialog came up twice at a single location. This has been fixed, it now comes up only once. * Fixed the File > Print to correctly format printed pages longer than two pages (previously pages 3ff would not format correctly), and significantly reduced the wait time for the Print Preview and Print Options dialog to appear. * Fixed the File > Print and File > Print Preview to correctly format Right to Left text projects. * Fixed a memory leak that would happen if the user canceled at the Print Options dialog. * Fixed a number of bugs affecting Free Translation mode. * Fixed a bug that might prevent a font color change from being registered correctly. * Fixed a bug that prevented a selection in the Auto-Saving tab of Preferences, from being remembered between sessions. This involved the check box that gives the option to: "Turn OFF periodic automatic saving of the document and knowledge base". Now the application will remember the check box selection. * The Unicode version now detects when the user attempts to input a non-Unicode text as a new source text. Adapt It attempts to determine its encoding and convert the input file to Unicode. As in the legacy version of Adapt It, the conversion may not work completely if the text contains glyphs from a hacked 8-bit font that utilize point values above 127. * Fixed the ALT+RightArrow hot key when in the Choose Translation dialog so that it now executes a "Cancel and Select" operation in which the dialog closes and Adapt It extends the selection one pile to the right. * Fixed the operation of the radio buttons and edit box next to the middle radio button in the Consistency Check Dialog. Clicking in the edit box now automatically selects the associated radio button. Also, if the user clicks in the edit box and starts typing the associated radio button gets automatically selected if it wasn't selected already. Version 4.1.5 update 31May2009: ---------------------------------------------- Feature changes and new features in 4.1.5 ---------------------------------------------- * A user can now edit the source text word/phrase at the current location of the phrasebox without having to select the source text word/phrase at that location. This provides a more convenient way to change the spelling of a source text word/phrase when the phrasebox is at that location. Editing the source text in this manner can be initiated via the Ctrl+Q hot key (Command-Shift-E on the Mac), or via the Edit Source Text... selection on the Edit menu. ---------------------------------------------- Bug fixes in 4.1.5 ---------------------------------------------- * Fixed the behavior of the View Filtered Material dialog so that it now allows editing of the text associated with the marker that is selected. The dialog also closes when the user presses the Enter key, effectively pressing the "Save Changes" button. * Fixed the behavior of the Edit Source Text dialog so that it now closes when the user presses the Enter key instead of entering a newline in the dialog's edit box. * Fixed some memory leaks in the Edit Source Text routines. * Fixed a bug that was causing the application to think that punctuation had changed whenever the user clicked on the OK button of the Preferences dialog. The unnecessary processing of the document for punctuation changes could cause a noticeable delay after clicking OK in the Preferences dialog in long documents. * The automatic scrolling that Adapt It does during adaptation work should now do a better job of keeping the phrasebox within view. * Using ALT+TAB on Windows to change between running applications should now display the Adapt It icon in the list of icon choices. Version 4.1.4 update 29Apr2009: ---------------------------------------------- Feature changes and new features in 4.1.4 ---------------------------------------------- * Adapt It now can process an -xo command-line option. The -xo command-line option was specifically designed to make Adapt It's interface work better on an OLPC XO machine running the BALSA distribution of Ubuntu Linux (Intrepid). The -xo option causes Adapt It to use a toolbar with larger (but fewer) buttons; a mode bar that spans two lines instead of a single line under the toolbar; and a few dialogs adjusted for better layout. The -xo option is not restricted to use on the OLPC XO; it can be added to the command-line on most systems by right-clicking on a menu item, shortcut, or launcher icon that is normally used to start Adapt It, and choosing "Properties" from the popup menu. Find the Command or Target field that invokes Adapt It, and add a space followed by the -xo option to the launching command. * Updates the AI_USFM.xml USFM/style control file to coordinate with UBS USFM 2.208. ---------------------------------------------- Bug fixes in 4.1.4 ---------------------------------------------- * Fixed a bug that was displaying the wrong target phrase (usually a previous one) when the "Place medial punctuation" dialog appears during adaptation. * Fixed a bug that was allowing final punctuation to enter the Knowledgebase and be stored in adapted documents. If a user's current knowledge base has wrongly admitted items with punctuation into fields that should not contain punctuation, the user can fix the problem by doing the following: (1) run Adapt It, (2) Choose the project but cancel out at the Document page of the wizard so that no document is opened (or select File > Close if a document was opened), and (3) run the File > Restore Knowledgebase... command, selecting all documents that should be used for rebuilding the KB. (4) If Restore Knowledgebase... command discovered any wrongly stored punctuation in the KB and adaptation documents, the user is notified and an error log called KBRestoreErrorLog.txt is saved in the project folder. The rebuilt KB will no longer contain any final punctuation. If any of the documents used to restore the KB contained incorrectly stored punctuation, that punctuation is removed from the appropriate fields of those documents and the documents are re-saved. * Adapt It's position and size on the desktop is now preserved more consistently, between sessions. Also, if Adapt It's frame was maximized on last use, it starts the new session maximized, even when last used on a desktop spread across a second monitor with Adapt It on either monitor. * Changed the Adapt It Help Topics to display the "Using Adapt It" HTML page as its starting page instead of the Glossary page. Also fixed a number of reported dead links in the HTML Help files. Mac version: * Fixed a number of issues in the new Mac version. Note: Although the Mac version is newly released, its version numbers are assigned to be concurrent with the version numbers for Windows and Linux versions. Linux version: * Adapt It can now be configured for a better layout of its interface when running on a computer with high dpi resolution screen (like the OLPC XO). When Adapt It is invoked with the -xo command-line option, Adapt It substitutes a toolbar with double sized buttons/images, and spreads the check box and other items in the mode bar over two rows of controls so they won't disappear off the right end of the main window. Some other dialogs have also been adjusted to layout better on these high dpi resolution screens. Version 4.1.2 update 24Mar2009: ---------------------------------------------- Bug fixes in 4.1.2 ---------------------------------------------- * Fixed a crash in the Linux version that could happen when a text was adapted fully to the end of the document. The message "The End. Providing..." would appear to flicker and then a few seconds afterward the application would hang/crash (or the crash might happen if the Step Up button was clicked while at the end of the document). * Fixed the action of the checkbox in the Case tab of the Preferences dialog that reads "Check here if you want Adapt It to automatically distinguish between upper case and lower case letters". Previously checking this checkbox might fail to take effect until the second time it was checked. * Also adjusted the problem of the Case tab in Preferences not sizing properly when the list boxes have data in them (hiding some buttons at bottom). * Fixed Ctrl+O hot key on Linux version, and assigned Ctrl+Shift+O hot key to invoke Start Working... wizard on Linux version. ---------------------------------------------- Feature changes and new features in 4.1.2 ---------------------------------------------- * Added Menu short cut keys for the Advanced and Layout menus. * Focus now moves to the New Translation edit box of the Choose Translation dialog if the last Translation in the list box is removed. * Navigation text now displays "end fn" to mark the last source word of a footnote. Version 4.1.1 update 28Feb2009: ---------------------------------------------- Bug fixes in 4.1.1 ---------------------------------------------- * Fixed a bug in the KB Editor that was causing a program crash when removing an existing translation string from the list of translations for a given source phrase. * Changed the layout of buttons in some dialogs to allow configuration of OK and Cancel buttons to reverse their relative positions as required for the Mac port. This change has minimal impact on the Windows and Linux versions. * Choose Translation dialog now has a short-cut key for jumping to the "New Translation" edit box, and implements cyclical up/down arrow key selection (for Windows and Mac - Linux implementation is only partial) * Macintosh pre-release version: Fixes a number of Mac look-and-feel issues and source text selection issues. Version 4.1.0 update 31Jan2009: ---------------------------------------------- Feature changes and new features in 4.1.0 ---------------------------------------------- * Sil Converters is now implemented in the Windows port. SIL Converters must first be installed on the computer to enable Adapt It's Tools Menu and Advanced Menu items related to SIL Converters. See SIL Converters documentation for more information. * The TU elements in the Knowledge Base XML files are now sorted. Some users requested this change to make Subversion backups more efficient. * The Knowledge Base Editor now shows only the "All Gloss Words Or Phrases" tab while Glossing is active. * Previously, the Knowledge Base Editor would not show a source phrase entry in its lists if the source phrase reference count was only 1 before the phrase box is placed at that location. In such cases, to examine a source phrase whose reference count was 1, the user had to first move the phrase box to a different location and select the source word/phrase desired for lookup, before invoking the KB Editor. Now, the source phrase appearing in the phrase box will be looked up, and found in the KB Editor even if its reference count was 1 before the KB Editor was invoked. * The Knowledge Base Editor now automatically looks up the source phrase at the current location of the phrase box, unless the user has selected a different source phrase at another location in the text at the time the Knowledge Base Editor is invoked. * The "Check Knowledge Base" selection was removed from the File menu. It was not really needed and only served to make project loading take longer. * Added "Please wait..." dialog for project loading at the project page. The saving of KBs was optimized for speed resulting in shorter wait times when opening a project with very large KBs. * Change the Restore Knowledge Base functionality so that it avoids trying to set the adaptations to their punctuation-containing forms. This prevents any punctuation-placement dialogs from opening during the restore operation - a useful thing to do because such dialogs have no useful purpose during restoration of the knowledge base. * In the event of an error loading an XML adaptation document, the name of the file being loaded now appears in the title bar of the message box. * The Adapt It Reference.doc includes a more complete description of the enhanced Edit Source Text process and Adapt It's "vertical editing" process that assists in the process. ---------------------------------------------- Bug fixes in 4.1.0 ---------------------------------------------- * The Go To... dialog and many other dialogs now default to the OK button when the user presses Enter. * Fixes the problem of pegging the CPU usage at near 100% while Adapt It is running. Now Adapt It should use less than 1% when the application is running but sitting in an idle state. * Fixes a problem in which the View Filtered Material dialog would not size properly if the list of standard format markers had many markers in it. * Fixes a possible spurious error message that can appear when the WX version reads a legacy project configuration file and the user sets up Auto Capitalization in the Case page of the Preferences dialog. * Fixes incorrect double-click behavior of the "Translations..." listbox in the Choose Translation dialog. Before the fix a double-click might result in the wrong list item being entered, or the dialog closing with nothing happening. * Fixes incorrect behavior of the "Accept for this item" button and the "Ignore it, I will fix it later" button in the "Inconsistency Found" dialog which can pop up in the event of an inconsistency during a Consistency Check... selection (from the Edit menu). The bug was causing these two buttons to be the same as pressing the dialog's "Cancel" button. * Fixes a bug in vertical editing that resulted in the Choose Translation dialog appearing twice, the first time with none of the controls initialized, the second time with initialization done twice and so the list box had the entries doubled. * Fixes the following bug: in vertical edit, with glosses being done before adaptations, the phrase box was not programmatically returned to the start of the editable span in the adaptations line. * Ubuntu Intrepid: Fixed the program hang/crash problem that occurred when opening the Help Topics item on the Help menu in the Linux port under Ubuntu Intrepid. * Fixed another bug in the Knowledge Base Editor where look ups of source phrases composed of two or more merged words could sometimes result in duplicate entries in the Source Phrase list box. * Fixes a bug in opening the Knowledge Base Editor from a source text selection, the item highlighted in the dialog's Source Phrase list might turn out to be the first item in the list, rather than the one the user selected in the main window. * Fixes the following bug: if the user inserted a placeholder before a word or phrase where standard format markers were stored, and later did a source text standard format export, then the SF markers at that location would not be included in the exported data. * Fixes a bug in the KB Export function that failed to insert end-of-line characters into the exported KB file (Unicode version only - the ANSI version did not have the problem). * Fixes the following bug: if the user selected source text which begins with an SF marker, such as \q for 'poetry', and in the Edit Source Text dialog removes all the selection but just leaves the \q marker in the box, the final result is that there is a white space gap in the text where the marker is stored (an underlying storage element with no content except the marker). What the user expects is that the marker will attach to the first word following the former selection - and that is now what happens. * Fixes the following bug introduced at version 4: if the source text contained two or more words in a merger and there was punctuation medially within the phrase, if the user did a File / Restore Knowledge Base operation, when the Place Phrase-Medial Punctuation dialog came up, the target text shown in the dialog was not the correct text, it was just whatever contents the phrase box had when the restore operation was invoked. Version 4.0.4 update 13Dec2008: * Better detection of the default documents working directory's actual location. For example, if on a Windows system, the user has "moved" the location of the "My Documents" folder (on Windows XP) or the "Documents" folder (on Vista), by right clicking on the default folder, selecting "Properties" and the "Move..." button and selects a new "destination" for "My Documents" (or "Documents"), this version should detect more acurately the change of location for these system folders, and establish/look for its "Adapt It (Unicode) Work" folder in that new location. * Fixes a long-standing bug in the Mac version that prevented scrolling from working correctly. This bug fix will allow the Mac port to move forward toward a release in early 2009. * Documentation files edited and updated. Version 4.0.3 update 26Nov2008: * About dialog now displays the date of the current release as well as the current version number. * Documentation files edited and updated. Version 4.0.2 update 22Nov2008: * Source Text Editing ("vertical editing") is more fully implemented and should be more robust. * Fixes a program hang that would happen if the computer's system language was set to something other than English and not a language that has an existing localization. This was reported by a user whose system language was set to Dutch, and the Default choice in the Choose Interface Language... dialog wrongly showed Dutch as the default first choice. But Dutch does not infact exist as an interface language choice, so the program encountered problems resulting in a program hang. * Fixes a number of problems that can occur if a project configuration file refers to a font name that does not exist on the current local machine (which might happen when migrating data to a different computer or platform). When the configuration file is read in, Adapt It will substitute a system font for any unknown font referred to in the project configuration file and notify the user of the action taken. The user would then need to insure that the appropriate font was installed, and/or select the appropriate font from the Fonts tab of the Preferences... dialog from the Edit menu. * Fixes the bottleneck that was causing the KBEditor to take too much time to populate the key string list box when there are many hundreds or thousands of entries in the list box. * Updates the AI_USFM.xml style control file to reflect the new USFM 2.2 changes made by UBS on 17Oct2008. Version 4.0.1 update 28Oct2008: * Fixes a potential crash problem in the source text editing's vertical edit process. * Adds sanity checks to insure that valid selections are made in a number of list box controls. * Makes adjustments to the sizers in a number of the larger dialogs and the wizard to better fit on the smaller 800 x 600 pixel screens being used on the new generation of mini notebook computers. * Updates the documentation for version 4. * Makes a few changes to the localization files. This is the first version advertised to the user community. New WX Version 4.0.0 initial release 16Oct2008: Adapt It WX is an entirely new version of Adapt It based on the wxWidgets Cross-Platform GUI Library. This new version of Adapt It is no longer dependent on Microsoft's MFC programming framework, nor does it utilize the .NET Framework, but is now independent of Microsoft's proprietary technologies in order to become a truly cross-platform application. See the "Known Issues and Limitations.txt" file for information on how this cross-platform version differs from previous legacy versions. (See the legacy version 3.6.4 for changes prior to this new release of Adapt It WX)